Pickling adalah proses untuk
permukaan logam yang digunakan untuk menghilangkan kotoran, seperti noda,
kontaminan anorganik (Carbon), dan karat atau kerak dari logam besi, tembaga,
logam mulia, dan paduan aluminium.
Corrosion is defined as the chemical or electrochemical degradation of metals
due to their reaction with the environment. The corrosion of iron, better known
as rusting, is an oxidation-reduction process that destroys iron objects left
out in open, moist air. In the United States alone, it is estimated that the
cost of corrosion, in equipment maintenance, repair, and replacement, exceeds
$300 billion per year. What kinds of chemical treatments, surface coatings, or
combinations of metals will prevent the corrosion of iron?
When iron metal is exposed to oxygen and water, a familiar result is
observed-rust. The rusting process consists of several steps. In the first
step, iron is oxidized to iron(II) ions, Fe2+, and oxygen from the air is
reduced to hydroxide ions, OH-. This oxidation-reduction reaction takes place
via two separate but simultaneous half-reactions (Equation 1 and 2);
Oxidation half-reaction: Fe(s) →
Fe2+(aq) + 2e- (Equation 1)
Reduction half-reaction: O2(g) + 2H2O(l) + 4e- → 4OH-(aq) (Equation 2)
Combining the oxidation and reduction half-reactions gives the balanced
chemical equation for the overall reaction of iron, oxygen, and water (Equation
3). Notice that two iron atoms are oxidized for every oxygen molecule that is
reduced-the number of electrons gained by one oxygen molecule is equal to the
number of electrons given up by two iron atoms.
2Fe(s) + O2(g) + 2H2O(1) → 2Fe2+(aq) + 4OH-(aq) (Equation 3)
Fe2+ and OH- ions may combine to form solid iron(II) hydroxide,
Fe(OH)2 (Equation 4). This is almost never observed, however, because iron(II)
hydroxide reacts further with oxygen and water to form hydrated iron(III)
oxide, Fe2O3•nH2O, the flaky, reddish-brown solid known as rust
(Equation 5).
Fe2+(aq) + 2OH-(aq) →
Fe(OH)2(s) (Equation 4)
4Fe(OH)2(s) + O2(g) + xH2O(I)→ 2Fe2O3•(x+4)H2O(s)
Rust (Equation 5)
Our product can remove rust and carbon remover in metal, especially iron. It's contain substances that inhibited
corrosion (decreased the rate of metal oxidation/ over etching).a. DIACLEAN AC-300
Inhibited
Acid for Immersion Application
DESCRIPTION
DIACLEAN AC-300 is a liquid
inhibited acid product used by immersion for the removal of rust and scale from ferrous surfaces. Inorganic acid based.
APPLICATION :
DIACLEAN
AC-300 is used as a pickling in dip processes as follows:
Concentration:
10 to 50 % (v/v)1
Total
Acid: 5 to 50 points
Temperature:
Ambient
Time:
10 - 30 minutes
This product can be used to remove Carbon and Rusty :
→ →
Before proses After proses
b.DIACLEAN AC-500
Inhibited
Acid for Immersion Application
DESCRIPTION :
DIACLEAN AC-500 is a liquid
inhibited acid product used by immersion for the removal of rust and scale from ferrous surfaces. Inorganic acid based.
APPLICATION :
DIACLEAN
AC-500 is used as a pickling in dip processes as follows:
Concentration:
10 to 50 % (v/v)
Total
Acid: 12 to 66 points
Temperature:
Ambient
Time:
10 - 30 minutes
*For
best result, after use deruster (pickling) usually
continue with passivating usage (Dia passivation
L-44 or Dia Passivation RP), for neutralize conditions on the metal surface.
Optimum process sequence of removing rust in Customer, Dipping application :
a. Pickling (Rust remover)
Product : Diaclean AC-500/Diaclean AC-300
Temperature : RT
Contact Time : 15 - 30 minutes (depending on rusty)
b. Rinsing, prevent contamination
Product : City water
Temperature : Room Temperature (RT), ambien
Contact Time : 1 - 2 minutes
c. Passivation
Product : Dia Passivation RP/Dia Passivation L-44
Temperature : Room Temperature (RT), ambien
Contact Time : 1 - 2 minutes
For detail information, please contact us :
PT. Aalen Chemicals Indonesia
Jl. Pulobuaran III Blok G3,
Kawasan industri JIEP Pulogadung
Tlp : 021-46830522
Website : www.aalen.co.id
Email : aalen.chemicals@gmail.com, aalen@cbn.net.id
